This Chevy 350 turnkey crate engine by Tuff Dawg Engines would be EXCELLENT for just about any street rod. Would also be suitable for other applications (call or email us for details). With 330HP @ 5000rpm and 390ft lbs of torque @ 3500rpm it has good all around power, and works well with either a manual or automatic transmission. This engine has enough cam to let you know it has good all around power but not too big as to need to change to a different stall speed convertor. This engine will run on leaded or unleaded pump fuel.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

• 3.484" stroke nodular iron crank
• 5.7" forged rods with ARP rod bolts
• 9 to 1 compression flat top pistons

More special features of this engine include:

• Seasoned 4-bolt main block
• Deck head gasket surface on block to ensure a good seal
• New CompCams hydraulic flat tappet high performance cam
• 76cc heads with 1.940"Int/1.500"Exh valves
• New 1.250" high performance springs set up to match cam
• New High temperature valve seals
• New Spiral-type valve guides
• New Screw-in rocker studs with guide plates
• New Steel rocker arms with balls and nuts
• New Hardened push rods
• New Perfect Circle rings
• New Double row timing set
• New High volume oil pump with welded big pickup screen and steel drive shaft and steel guide
• New Brass expansion plugs
• New Edelbrock (non-egr) Dual Plane Performer aluminum intake
• All parts are painted separately before assembly for that show quality look

This Is A Real Turnkey Engine

This engine has been started on gas and run. The camshaft has been broken in and the valves adjusted. Carburetor and timing has been initially set, but should be checked after installing in vehicle.

Also included and installed on engine:

• New Chrome oil pan
• New Chrome timing cover with Chevrolet "bowtie" stamped in the middle
• New Chrome valve covers with "bowtie" stamp to match timing cover
• New Chrome air cleaner
• New Chrome dipstick and chrome tube
• New 4 bbl carburetor
• New Mechanical fuel pump. Does not need external fuel regulator to control fuel as the regulator is built into the pump
• New Fuel filter
• New PCV valve
• New HEI distributor
• New Accel 8mm suppression spark plug wires
• New Spark plugs
• New Water pump with long nose
• New Chrome water pump pulley
• New Chrome crankshaft pulley
• Alternator with internal regulator
• New Chrome alternator brackets
• New Water outlet
• New Thermostat
• New High torque starter
• New 168 tooth flexplate for A/T

Not included on this engine:

Exhaust manifolds, hoses, fan, accessory belts (except alternator belt), radiator, linkage or miscellaneous.